MECHAS ORIGINAL PROJECT
ABSTRACT & GALLERY ARTWORK
NEW AGE FASHION DESIGNS
Fertility Goddess
C & R MODELS
CUSTOM FURNITURE
Main
Friday
Oct132023

PROBE DROID DISPATCH PODS STUDIO SCALE REPLICA PAGE

Welcome to the STUDIO SCALE ESB Probe droid DISPATCH POD replica page.  This is a studio scale replica of the filming model.  There were two versions made for the film.  They are both represented here as STL projects and RESIN PRINTS.  You can tell them apart by looking at the nozzle section.  Version 2 has struts attached midway up the nozzle, Version 1  has no struts.  The detail on these two models is highly engaging so I would recommend printing in resin.  Email: impervium@hotmail.com



You can also see addtional video and more behind the scenes content at my fb page: facebook.com/letsmakethestuff

 

Have a look at the physical resin kits.  Absolutely beautiful!


Digital (STL) file packs.

 

DISPATCH POD - STL FILE SET (no physical media)

PHYSICAL KIT (resin 3D-printed)

PROBE DROID DISPATCH POD PHYSICAL KIT - resin 3D printed high st

Version 1 (the shorter) is AVAILABLE NOW.  Version 2 (the longer one) will be available by the end of June 2024. You can still order it at the discount shown above).

  


Digital (STL) file packs.

 

DISPATCH POD - STL FILE SET (no physical media)

Here you can see both versions 1 and 2 of the dispatch pod filming miniatures.

This project is available as both a 3D file set and a physical model (resin 3D print and castings).

 VERSION 1 (SHORTER) DISPATCH POD: breaks down into the following parts:

  1. MAIN HULL (Hollow to save material and weight - all 5 chasses connected
  2. Main engine Bell (pre-drilled holes ready for LED lighting)
  3. 5 subthruster assemblies
  4. 5 circular hatches
  5. 5 ribbed panels
  6. 5 upper panels
  7. 5 attitude thruster assemblies
  8. 5 lamp fixtures
  9. top cap
  10. bottom chassis

VERSION 2 (LONGER) DISPATCH POD KIT breaks down into the following parts:

  1. MAIN HULL (Hollow to save material and weight - all 5 chasses connected
  2. Main ENGINE BELL (ready for LED install pre-drilled holes)
  3. 5 circular hatches
  4. top cap
  5. bottom chassis
  6. 5 attitude thruster housings
  7. 5 attitude thruster assemblies
  8. 5 engine bell supports
  9. 5 thruster supports

Both kits include both versions (reduced part count and extended part count)

 

 


HOW IT WAS MADE:

  

  

 

At the stage you see here, the version 1 is nearling completion.  More refinement is needed on the chassis and then trimming with tubes, creating the underside enclosure and hyper detailing the upper and lower surfaces.

Making Probe Droid Dispatch Pod Version 2:

 

 


BACK TO THE 3D MODELS PAGE

BACK TO THE STUDIO SCALE MODEL PAGE